stainless steel lap joint stub end

• 

  Carbon Steel Section -

  • Elbow 90° long radius
  • Elbow 45°
  • Elbow 90° short radius
  • Elbow 180° long radius
  • Elbow 180° short radius
  • Tee straight
  • Tee reducing
  • Reducer concentric
  • Reducer eccentric
  • Buttweld-Cross
  • Buttweld Cap
  • Buttweld lateral tee
  • Carbon steel straight cross
  • Carbon steel reducing cross

  Stainless Section -
  

  • Elbow 90° long radius
  • Elbow 45°
  • Elbow 90° short radius
  • Elbow 180° long radius
  • Elbow 180° short radius
  • Tee straight
  • Tee reducing
  • Reducer concentric
  • Reducer eccentric
  • Buttweld-Lap Joint Stub End
  • Lap joint stub end
  • Buttweld-Cross
  • Stainless Steel straight cross
  • Stainless Steel reducing cross

 

stainless steel lap joint stub end is a type of pipe fitting is defined as a part used in a piping system, Welding a fitting to the pipe means it is permanently leakproof. We are a largest pipe fitting manufacturer for all type of industries in India & shipping worldwide. We can manufacture all 3 groups of Fittings such as Buttweld (BW) fittings, Socket Weld (SW) fittings & Threaded (THD) fittings as per ASME B16.11 standards & other International standards. Specialized in 45 degree elbow, 90 degree elbow, 180 degree elbow, concentric reducer, eccentric reducer, straight tee, equal tee, reducing tee, Y tee, cross, lap joint stub end, pipe cap, blind flange, slip-on neck flange, butt-welding neck flange, flat flange. Metal-Tech Engineers continues to meet customers’ needs through global quality standards from original design to distribution. Metal-Tech Engineers manufactures to global standards.

We are one of the leading importer, stockholder, suppliers & exporters dealing in stainless steel lap joint stub end since 1990. When procuring raw materials to manufacture stainless steel lap joint stub end, our primary responsibility is to ensure that same quality and consistency exists in our supply base.

stainless steel lap joint stub end Specification

Stainless Steel stainless steel lap joint stub end | Carbon Steel stainless steel lap joint stub end | Nickel Alloys stainless steel lap joint stub end | Monel stainless steel lap joint stub end | Alloy Steel stainless steel lap joint stub end | Mild Steel stainless steel lap joint stub end

• Fittings Type:
  

  Butt Weld Fittings:
  LR & SR Elbows, Tees, Ecc., and Conc., Reducers & Caps 
  Forged Fittings:
  Socket Weld, Threaded fittings, Pipe nipple and Swage nipple and Butt welding outlets

• Standards:
  

  ASME B16.9, ASME B16.28, and ASME B16.25
  ASME B16.11, and MSS-SP 97
  ANSI B16.9 / 16.28, ASTM A53/A106, API 5L, ASME B36.10M---1996, DIN2605 / 2615 / 2616, JIS P2311/2312

• Material and Grades: 
  

  Carbon Steel:
  ASTM A234 Gr. WPB
  ASTM A420 Gr. WPL6
  ASTM A105
  ASTM A350 Gr. LF2 
  Stainless Steel:
  ASTM A403 WP316/316L
  ASTM A403 WP304/304L
  ASTM A182 F316L, 304L

• Available Sizes:
  

  Butt Weld Fittings: ½’’ to 102’’
  Forged Fittings: 1/8’’ to 4’’
  Outlets: Up to 36’’
  Thickness: SGP, STD, SCH40, SCH80, SCH160. XS,XXS and so on.

  Other grades or sizes may be available upon request.

 

 

Product name: lap joint stub end
Item: buttweld-Lap Joint Stub End
Details:

Nominal Pipe Size	Outside Diameter at Bevel	Length	Radius of Fillet		Diameter of Lap
			A	B
NPS	D	L	R		G
1/2 3/4 1	21.3 26.7 33.4	51 51 51	3.0 3.0 3.0	0.8 0.8 0.8	35 43 51
11/4 11/2 2	42.2 48.3 60.3	51 51 64	5.0 6.0 8.0	0.8 0.8 0.8	64 73 92
21/2 3 31/2	73.0 88.9 101.6	64 64 76	8.0 10.0 10.0	0.8 0.8 0.8	106 127 140
4 5 6	114.3 141.3 168.3	76 76 89	11.0 11.0 13.0	0.8 1.6 1.6	157 185 218
8 10 12	219.1 273.0 323.8	102 127 152	13.0 13.0 13.0	1.6 1.6 1.6	270 324 381
14 16 18	355.6 406.4 457.0	152 152 152	13.0 13.0 13.0	1.6 1.6 1.6	413 470 533
20 22 24	508.0 559.0 610.0	152 152 152	13.0 13.0 13.0	1.6 -- 1.6	584 641 692
Minimum lap thickness shall not be less than nominal wall thickness. Contact faces of stub ends shall have a concentric serration or spiral according to the purchaser's requirements. These lengths and radius apply for schedule 40s or thinner stainless steel pipes. Radius of fillet B is only effective to MSS SP-43 lap joint stub ends. click here for Lap Joint Flange

 

Package details: Each order is packaged according to the customer’s standards including preparation for export such as wooden case, pallet or according to customer's requirement

All shipping documentation is provided for seamless delivery from mill to customer.

We export to:

stainless steel lap joint stub end exporter, manufacturer & suppliers in Dubai, Saudi Arabia, Qatar, West Africa, Russia, Kuwait etc.

Material	Fittings	Flanges
Carbon Steel	A234 Gr WPA	A105
	A234 Gr WPB	A105
	A234 Gr WPC	A105
Carbon Steel Alloy High-Temp	A234 Gr WP1	A182 Gr F1
	A234 Gr WP11	A182 Gr F11
	A234 Gr WP12	A182 Gr F12
	A234 Gr WP22	A182 Gr F22
	A234 Gr WP5	A182 Gr F5
	A234 Gr WP9	A182 Gr F9
Carbon Steel Alloy Low-Temp	A420 Gr WPL6	A350 Gr LF2
	A420 Gr WPL3	A350 Gr LF3
Austenitic Stainless Steel	A403 Gr WP304	A182 Gr F304
	A403 Gr WP316	A182 Gr F316
	A403 Gr WP321	A182 Gr F321
	A403 Gr WP347	A182 Gr F347

Fittings

• A234 = This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction.
• A420 = Standard specification for piping fittings of wrought carbon steel and alloy steel for low-temperature service.
• A403 = Standard specification for wrought austenitic stainless steel piping fittings.

Flanges

• A105 = This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, Valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions.
• A182 = This specification covers forged or rolled alloy and stainless steel pipe flanges, forged fittings, and Valves and parts for high-temperature service.
• A350 = This specification covers several grades of carbon and low alloy steel forged or ring-rolled flanges, forged fittings and Valves for low-temperature service.