stainless steel reducing tee

• 

  Carbon Steel Section -

  • Elbow 90° long radius
  • Elbow 45°
  • Elbow 90° short radius
  • Elbow 180° long radius
  • Elbow 180° short radius
  • Tee straight
  • Tee reducing
  • Reducer concentric
  • Reducer eccentric
  • Buttweld-Cross
  • Buttweld Cap
  • Buttweld lateral tee
  • Carbon steel straight cross
  • Carbon steel reducing cross

  Stainless Section -
  

  • Elbow 90° long radius
  • Elbow 45°
  • Elbow 90° short radius
  • Elbow 180° long radius
  • Elbow 180° short radius
  • Tee straight
  • Tee reducing
  • Reducer concentric
  • Reducer eccentric
  • Buttweld-Lap Joint Stub End
  • Lap joint stub end
  • Buttweld-Cross
  • Stainless Steel straight cross
  • Stainless Steel reducing cross

 

stainless steel reducing tee is a type of pipe fitting is defined as a part used in a piping system, Welding a fitting to the pipe means it is permanently leakproof. We are a largest pipe fitting manufacturer for all type of industries in India & shipping worldwide. We can manufacture all 3 groups of Fittings such as Buttweld (BW) fittings, Socket Weld (SW) fittings & Threaded (THD) fittings as per ASME B16.11 standards & other International standards. Specialized in 45 degree elbow, 90 degree elbow, 180 degree elbow, concentric reducer, eccentric reducer, straight tee, equal tee, reducing tee, Y tee, cross, lap joint stub end, pipe cap, blind flange, slip-on neck flange, butt-welding neck flange, flat flange. Metal-Tech Engineers continues to meet customers’ needs through global quality standards from original design to distribution. Metal-Tech Engineers manufactures to global standards.

We are one of the leading importer, stockholder, suppliers & exporters dealing in stainless steel reducing tee since 1990. When procuring raw materials to manufacture stainless steel reducing tee, our primary responsibility is to ensure that same quality and consistency exists in our supply base.

stainless steel reducing tee Specification

Stainless Steel stainless steel reducing tee | Carbon Steel stainless steel reducing tee | Nickel Alloys stainless steel reducing tee | Monel stainless steel reducing tee | Alloy Steel stainless steel reducing tee | Mild Steel stainless steel reducing tee

• Fittings Type:
  

  Butt Weld Fittings:
  LR & SR Elbows, Tees, Ecc., and Conc., Reducers & Caps 
  Forged Fittings:
  Socket Weld, Threaded fittings, Pipe nipple and Swage nipple and Butt welding outlets

• Standards:
  

  ASME B16.9, ASME B16.28, and ASME B16.25
  ASME B16.11, and MSS-SP 97
  ANSI B16.9 / 16.28, ASTM A53/A106, API 5L, ASME B36.10M---1996, DIN2605 / 2615 / 2616, JIS P2311/2312

• Material and Grades: 
  

  Carbon Steel:
  ASTM A234 Gr. WPB
  ASTM A420 Gr. WPL6
  ASTM A105
  ASTM A350 Gr. LF2 
  Stainless Steel:
  ASTM A403 WP316/316L
  ASTM A403 WP304/304L
  ASTM A182 F316L, 304L

• Available Sizes:
  

  Butt Weld Fittings: ½’’ to 102’’
  Forged Fittings: 1/8’’ to 4’’
  Outlets: Up to 36’’
  Thickness: SGP, STD, SCH40, SCH80, SCH160. XS,XXS and so on.

  Other grades or sizes may be available upon request.

 

 

Product name: stainless steel reducing tee
Item: buttweld-Tee
Details:

Nominal Diameter		Outside Diameter				Center to End
		D1		D2
DN	NPS	Series A	Series B	Series A	Series B	C	M
15×15×15	1/2×1/2×1/2	21.3	18	21.3	18	25	25
15×15×10	1/2×1/2×3/8	21.3	18	17.3	14	25	25
15×15×8	1/2×1/2×1/4	21.3	18	13.7	10	25	25
20×20×20	3/4×3/4×3/4	26.9	25	26.9	25	29	29
20×20×15	3/4×3/4×1/2	26.9	25	21.3	18	29	29
20×20×10	3/4×3/4×3/8	26.9	25	17.3	14	29	29
25×25×25	1×1×1	33.7	32	33.7	32	38	38
25×25×20	1×1×3/4	33.7	32	26.9	25	38	38
25×25×15	1×1×1/2	33.7	32	21.3	18	38	38
32×32×32	1.1/4×1.1/4×1.1/4	42.4	38	42.4	38	48	48
32×32×25	1.1/4×1.1/4×1	42.4	38	33.7	32	48	48
32×32×20	1.1/4×1.1/4×3/4	42.4	38	26.9	25	48	48
32×32×15	1.1/4×1.1/4×1/2	42.4	38	21.3	18	48	48
40×40×40	1.1/2×1.1/2×1.1/2	48.3	45	48.3	45	57	57
40×40×32	1.1/2×1.1/2×1.1/4	48.3	45	42.4	38	57	57
40×40×25	1.1/2×1.1/2×1	48.3	45	33.7	32	57	57
40×40×20	1.1/2×1.1/2×3/4	48.3	45	26.9	25	57	57
40×40×15	1.1/2×1.1/2×1/2	48.3	45	21.3	18	57	57
50×50×50	2×2×2	60.3	57	60.3	57	64	64
50×50×40	2×2×1.1/2	60.3	57	48.3	45	64	60
50×50×32	2×2×1.1/4	60.3	57	42.4	38	64	57
50×50×25	2×2×1	60.3	57	33.7	32	64	51
50×50×20	2×2×3/4	60.3	57	26.9	25	64	44
65×65×65	2.1/2×2/1/2×2.1/2	73.0	76	73.0	76	76	76
65×65×50	2.1/2×2/1/2×2	73.0	76	60.3	57	76	70
65×65×40	2.1/2×2/1/2×1.1/2	73.0	76	48.3	45	76	67
65×65×32	2.1/2×2/1/2×1.1/4	73.0	76	42.4	38	76	64
65×65×25	2.1/2×2/1/2×1	73.0	76	33.7	32	76	57
80×80×80	3×3×3	88.9	89	88.9	89	86	86
80×80×65	3×3×2.1/2	88.9	89	73.0	76	86	83
80×80×50	3×3×2	88.9	89	60.3	57	86	76
80×80×40	3×3×1.1/2	88.9	89	48.3	45	86	73
80×80×32	3×3×1.1/4	88.9	89	42.4	38	86	70
90×90×90	3.1/2×3.1/2×3.1/2	101.6	-	101.6	-	95	95
90×90×80	3.1/2×3.1/2×3	101.6	-	88.9	89	95	92
90×90×65	3.1/2×3.1/2×2.1/2	101.6	-	73.0	76	95	89
90×90×50	3.1/2×3.1/2×2	101.6	-	60.3	57	95	83
90×90×40	3.1/2×3.1/2×1.1/2	101.6	-	48.3	45	95	79
100×100×100	4×4×4	114.3	108	114.3	108	105	105
100×100×90	4×4×3.1/2	114.3	108	101.6	-	105	102
100×100×80	4×4×3	114.3	108	88.9	89	105	98
100×100×65	4×4×2.1/2	114.3	108	73.0	76	105	95
100×100×50	4×4×2	114.3	108	60.3	57	105	89
100×100×40	4×4×1.1/2	114.3	108	48.3	45	105	86
125×125×125	5×5×5	141.3	133	141.3	133	124	124
125×125×100	5×5×4	141.3	133	114.3	108	124	117
125×125×90	5×5×3.1/2	141.3	-	101.6	-	124	114
125×125×80	5×5×3	141.3	133	88.9	89	124	111
125×125×65	5×5×2.1.2	141.3	133	73.0	76	124	108
125×125×50	5×5×2	141.3	133	60.3	57	124	105
150×150×150	6×6×6	168.3	159	168.3	159	143	143
150×150×125	6×6×5	168.3	159	141.3	133	143	137
150×150×100	6×6×4	168.3	159	114.3	108	143	130
150×150×90	6×6×3.1/2	168.3	-	101.6	-	143	127
150×150×80	6×6×3	168.3	159	88.9	89	143	124
150×150×65	6×6×2.1/2	168.3	159	73.0	76	143	121
200×200×200	8×8×8	219.1	219	219.1	219	178	178
200×200×150	8×8×6	219.1	219	168.3	159	178	168
200×200×125	8×8×5	219.1	219	141.4	133	178	162
200×200×100	8×8×4	219.1	219	114.3	108	178	156
200×200×90	8×8×3.1/2	219.1	-	101.6	-	178	152
250×250×250	10×10×10	273.0	273	273.0	273	216	216
250×250×200	10×10×8	273.0	273	219.1	219	216	203
250×250×150	10×10×6	273.0	273	168.3	159	216	194
250×250×125	10×10×5	273.0	273	141.3	133	216	191
250×250×100	10×10×4	273.0	273	114.3	108	216	184
300×300×300	12×12×12	323.9	325	323.9	325	254	254
300×300×250	12×12×10	323.9	325	273.0	273	254	241
300×300×200	12×12×8	323.9	325	219.1	219	254	229
300×300×150	12×12×6	323.9	325	168.3	159	254	219
300×300×125	12×12×5	323.9	325	141.3	133	254	216
350×350×350	14×14×14	355.6	377	355.6	377	279	279
350×350×300	14×14×12	355.6	377	323.9	325	279	270
350×350×250	14×14×10	355.6	377	273.0	273	279	257
350×350×200	14×14×8	355.6	377	219.1	219	279	248
350×350×150	14×14×6	355.6	377	168.3	159	279	238
400×400×400	16×16×16	406.4	426	406.4	426	305	305
400×400×350	16×16×14	406.4	426	355.6	377	305	305
400×400×300	16×16×12	406.4	426	323.9	325	305	295
400×400×250	16×16×10	406.4	426	273.0	273	305	283
400×400×200	16×16×8	406.4	426	219.1	219	305	273
400×400×150	16×16×6	406.4	426	168.3	159	305	264

Package details: Each order is packaged according to the customer’s standards including preparation for export such as wooden case, pallet or according to customer's requirement

All shipping documentation is provided for seamless delivery from mill to customer.

We export to:

stainless steel reducing tee exporter, manufacturer & suppliers in Dubai, Saudi Arabia, Qatar, West Africa, Russia, Kuwait etc.

Material	Fittings	Flanges
Carbon Steel	A234 Gr WPA	A105
	A234 Gr WPB	A105
	A234 Gr WPC	A105
Carbon Steel Alloy High-Temp	A234 Gr WP1	A182 Gr F1
	A234 Gr WP11	A182 Gr F11
	A234 Gr WP12	A182 Gr F12
	A234 Gr WP22	A182 Gr F22
	A234 Gr WP5	A182 Gr F5
	A234 Gr WP9	A182 Gr F9
Carbon Steel Alloy Low-Temp	A420 Gr WPL6	A350 Gr LF2
	A420 Gr WPL3	A350 Gr LF3
Austenitic Stainless Steel	A403 Gr WP304	A182 Gr F304
	A403 Gr WP316	A182 Gr F316
	A403 Gr WP321	A182 Gr F321
	A403 Gr WP347	A182 Gr F347

Fittings

• A234 = This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction.
• A420 = Standard specification for piping fittings of wrought carbon steel and alloy steel for low-temperature service.
• A403 = Standard specification for wrought austenitic stainless steel piping fittings.

Flanges

• A105 = This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, Valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions.
• A182 = This specification covers forged or rolled alloy and stainless steel pipe flanges, forged fittings, and Valves and parts for high-temperature service.
• A350 = This specification covers several grades of carbon and low alloy steel forged or ring-rolled flanges, forged fittings and Valves for low-temperature service.